-
Article &
Photos by Jim Bacon
If you
like the zero shiny factor on your jeep or want to add a bit
of individuality to your rig, then this simple mod is for
you.
All you need
is some primer (not required) and the color you like via the rattle
can. If you are a perfectionist, take some fine sand paper, or
a green scrub pad and slightly rough up the surface to be painted.
I bypassed that and used a heavy duty primer made for heavy rust,
because it contains twice the adhering power than normal primer.
-
Remove your
head light bezels by unscrewing the 3 torx screws on each bezel.
-
Spray the
head light bezels with primer, let it dry.
-
Spray the
head light bezels with color paint of choice, let it dry.
-
Spray the
head light bezels with clear enamel (not required), let it dry.
-
Your done!
|
-
PRODUCT INFORMATION
|
|
Your choice of Rattle can
:-) |
|
|
)
)
)
)
)
)
