-
-
Article &
Photos by Jim Bacon
-
Nates
4x4 Offroad Fabricators offer a great selection of
custom front and rear bumper for your TJ, CJ and XJ in additiona to several other fabricated products in
their line. We received their Model 1 TJ front
bumper to install on our TJ. The first thing we
always do when we receive custom bumpers is inspect the
welds and they were top notch, the uniformity and
consistency are excellent.
Items they manufacture
-
XJ Front Bumper 1984 - 2001
-
Front Trailer Hitch 2"
-
Lift Shackles (set of 4)
-
Wrangler Model 1
Winch-Optional Bumper
-
Wrangler Model 2 Winch
Bumper
-
Wrangler or CJ Model 1 Rear
Bumper
-
D-Ring Recover Tabs
-
Tire Mounting Plates
-
Differential Guards
-
Shackle Recovery Bracket
-
What You Will Need
• Socket Wrench
-
• Torx Bit
Installation
1.
The
great thing about installing a front bumper on a TJ is the
simplicity. First, you will unbolt your fog lights and
let them hang until the new bumper is on.
2. Next,
simply unbolt the top two torx bolts that hold the tow hooks
/ bumper and one underneath. Once you have all six
bolts removed it will slide right off.
3.
Your new Model 1 bumper will then slip onto the stock
location.
4.
Now you can put your fogs onto the light tabs on the bumper
and then tighten all bolts down and that's it, your done!
|
-
PRODUCT INFORMATION
|
|
Nates 4x4 Offroad Fabricators
|
|
)
)
)
